POD-6552 User’s Manual 44
Chapter 5 PCI SVGA Setup

5.1 Introduction

The board has an onboard interface. The specifications and features are
described as follows:

5.1.1 Chipset

The POD-6552 uses a Intel 852GM + ICH4 chipset for its graphic con-
troller. It supports LVDS LCD displays, conventional CRT monitors.

5.1.2 Display memory

The 852GM chip with optimized Shared Memory Architecture, supports
up to 64 MB frame buffer using system memory to provide LVDS mode
up to 1280 x 1024 @ 36bpp with frequency range from 25-MHz to 112-
MHz. the interface can drive CRT displays with resolutions up to 1600
MHz x 1200 @ 24 bpp 75 Hz.

5.1.3 Display types

CRT and panel displays can be used simultaneously. The board can be set
in one of three configurations: on a CRT, on a flat panel display, or on
both simultaneously. The system is initially set to simultaneous display
mode. If you want to enable the CRT display only or the flat panel display
only, please contact Intel Corporation LTD., or our sales representative
for detailed information.