Intel S5400SF manual Pass/Fail Test Criteria

Intel® Server Board S5400SF Introduction

✏There is no support commitment for operating systems, adapter cards, and peripherals not listed in this document. Intel will consider requests for support on a case-by-case basis.

1.2Pass/Fail Test Criteria

For each operating system, adapter, and peripheral configuration, a test passes when specific criteria are met. There may be exceptions for some configurations with a particular characteristic. These exceptions will be addressed on a case-by-case basis. In general, a configuration passes testing if the following conditions are met:

•The operating system installed without error.

•Manufacturer’s installation instructions or Intel’s best-known methods were used for the operating system installation.

•No extraordinary workarounds were required during the operating system installation.

•The server system behaved as expected during and after the operating system installation.

•Application software installed and executed normally.

•Hardware compatibility tests ran to completion without error.

•Test software suites executed successfully

•Test and data files were created in the correct directories without error.

•Files copied from client to server and back match the original with zero errors.

•Clients remain connected to the server system.

•Industry standard test suites run to completion with zero errors.

All Intel® Server Board S5400SF testing was performed using the Intel® Server System SR1560SF.

Rev 1.0 3