Intel manual Intel Server Board SCB2 Specifications, Recommended Configurations and Order Codes

Intel® Server Board SCB2 Specifications

Processor/Cache
Processors Supported	Intel® Pentium® III processors with up to
	512-KB of integrated L2 cache.
	For the latest processor support,visit:
	http://support.intel.com/support/
	motherboards/server
System Memory
Memory Capacity	Six DIMM sockets for up to 6 GB of PC133
	SDRAM (64 MB to1GB DIMMs supported;
	memory must be populated in pairs)
Memory Type	PC/133 registered SDRAM 72-bit ECC,
	168-pin gold-plated DIMMs
DIMM Sizes	64 MB,128 MB,256 MB, 512 MB, 1 GB
Memory Voltage	3.3V only
Error Detection	Corrects single-bit errors, detects
	double-bit errors (using ECC memory)
Integrated On Board
Chipset	ServerWorks*Enterprise ServerSet*III HESL

Ultra160 SCSI Controller Adaptec* AIC7899 Dual Channel—two Ultra160/LVD channels (connect via one internal 68-pin wide connector, and one 68-pin high-density external SCSI connector)

Maximum data transfer: 160 MB/sec on each Ultra160/LVD channel

ATA/100 RAID Controller Promise Technologies*PDC20267 ATA/100 IDE RAID controller provides two channels of ATA/100 IDE that can be configured into either RAID level 0 or RAID level 1

	Maximum data transfer:100 MB/sec
	on each ATA/100 channel.
Intel® Server Adapter	Two Intel® PRO/100+ Fast Ethernet
	Controllers (Intel® 82550PM)
	Supports 10BASE-T and 100BASE-TX,
	RJ45 output
Graphics	ATI* Rage*XLSVGA PCI video controller
	with 8 MB of video memory
Super I/O Controller	National* PC97317*

Input/Output Features
PCI	Triple Peer PCI, up to six PCI slots on
	risers in a 2U system
	●	Bus A: 32-bit/33-MHz
	●	Bus B: 64-bit/66 MHz
	●	Bus C: 64-bit/66-MHz
IDE	One EIDE channel for a total of two IDE
	devices
USB	Two stacked USB connectors
Serial ports	External RJ45 serial, Internal COM1 header
Floppy Controller	1.44 MB, 2.88 MB, 3-mode support
Keyboard/Mouse	PS/2, 8240A-compatible

Server Management Features1

Remote Management Remote access to system status, logs, configuration data, and utilities–without a remote management card

Event filtering and alerting through proactive LAN and mobile devices

System Monitoring	System health indicators and corrective
and Auto-recovery	actions including:
	●	Automated power cycling
	●	OS watchdog timer
	●	Fault-resilient booting

Server Troubleshooting Continuous health monitoring, text console redirection, and error logs

Operating Systems Microsoft* Windows* 2000, Microsoft*

SupportedWindows NT*, Red Hat* Linux*, SCO UnixWare*, and Novell* NetWare*

System BIOS
BIOS Type	8 MB Flash EEPROM with AMI* BIOS,
	Multi-boot BBS (BIOS Boot Specification)
	1.4-compliant
Special Features	Plug and Play, IDE drive auto-configure,
	SMBIOS 2.3, ECC/Parity support,
	multilingual support
Configuration Utilities	System Set-up Utility (SSU) enables
	easy system setup of BIOS and utilities,
	Plug and Play

Jumpers and Front Panel Connectors

Front Panel Connectors	Power LED,power on/off switch, reset
Jumpers	CMOS clear, password clear, BMC boot
	write protect, BIOS recovery
Mechanical
Server Board Style	SSI Thin E-Bay
Server Board Size	12" x 13"
Server Board Power Requirements
+5V	7.06A maximum continuous current
+5V standby	1.54A minimum continuous current
+12V	5.0A maximum continuous current
+3.3V	12.0A maximum continuous current
-5V	0 maximum continuous current
-12V	0.25A maximum continuous current
Environment
Ambient Temperature2	Operating (system): 10°C to +35°C
	Non-operating/storage (system):
	-40°C to +70°C ambient
Relative Humidity	Non-operating: 95%, non-condensing
	@ 30°C
Product Regulations
Safety Compliance:
	UL/CUL 950-CSA 950 (UL
Europe/Russia	Recognition Mark)
	EN60950; CE Mark-EU Directive
International	73/23/EEC; GOST-R Mark
	IEC60950

EMI Verification—configured in a compatible3 Intel host system

U.S.	Verified to FCC, Class A
Canada	Verified to ICES-003, Class A
Europe/Russia	Verified to EN55022 (Class A) and
	EN55024 (CE Mark—EU Directive
	89/336/EEC)/GOST-R Mark
International/Japan	Verified to CISPR-22/VCCI, Class A
Australia/New Zealand	Verified to AS/NZS 3548, Class A
	(C-tick Mark)

Recommended Configurations and Order Codes

The following table provides several suggested configurations for 1U and 2U systems. Please visit www.intel.com/go/serverbuilder for the most recent product updates.
	1U System with Integrated SCSI	1U System with	2U System with Integrated SCSI	2U System with
		Integrated ATA/100 RAID		Integrated ATA/100RAID
Intel® Server Board SCB2	SCB2SCSI	SCB2ATA	SCB2SCSI	SCB2ATA
Intel® Server Chassis SR1200 (1U rack)	KCR5	KCR5	KSN5	Reference Chassis only4
or SR2200 (2U rack)4
Chassis Backplane (required)	BCR1USBPWB	BCR1UABPWB	Included with chassis	—
Redundant Power Module (optional)	N/A	N/A	AXX2PSMODL350	—
Sliding Rails (optional)	AXX1U2URAIL	AXX1U2URAIL	AXX1U2URAIL	—
CD-ROM/Floppy Module (optional)	AXXCDFLOPPY	AXXCDFLOPPY	AXXCDFLOPPY	—
Locking Bezel (optional black or beige)	ACRBEZBLACK or ACRBEZBEIGE	ACRBEZBLACK or ACRBEZBEIGE	ASNBEZBLACK or ASNBEZBEIGE	—
ICMB Board Assembly (optional)	AXX2ICMBKIT	AXX2ICMBKIT	AXX2ICMBKIT	AXX2ICMBKIT
RJ45 to DB9 Serial Connector Converter	AXXRJ45DB9	AXXRJ45DB9	AXXRJ45DB9	AXXRJ45DB9
Chassis Spares Kits	FCRSPRKIT	FCRSPRKIT	FSNSPRKIT	—
Intel® RAID Controller SRCMR (modular ROMB)6	SRCMR	—	SRCMR	—
Intel® Server RAID Controller SRCU31L (low profile)6	—	SRCU31L	—	SRCU31L
Intel® PRO/1000 XT Server Adapter (low profile)6	PWLA8490XTL	PWLA8490XTL	PWLA8490XTL	PWLA8490XTL

1.Full utilization of some server management features is dependent on the use of an Intel® server chassis.

2.Environment ambient temperature is the system intake measurement for an Intel® Server Board SCB2 installed in an Intel® Server Chassis SR1200.

3.Compatible host system denotes the system(s) with which Intel tested the board and found it compliant.

4.See http://support.intel.com for a complete list of Intel and third-party compatible chassis.

5.The order code listed is for a chassis with an AC power supply. See www.intel.com/go/serverbuilder for ordering information with respect to the –48V DC power supply.

6.See http://support.intel.com for a complete list of validated Intel and third-party adapter cards.

For the most current product information on Intel server building blocks, visit: www.intel.com/go/serverbuilder

All products, dates, and figures specified are preliminary based on current expectations, provided for planning purposes only, and are subject to change without notice. Availability in different channels may vary.

Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel® prod- ucts including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life saving, or life sustaining applications. Intel may make changes to specifications and product descriptions at any time, without notice.

Intel, Intel logo, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries.
*Other names and brands may be claimed as the property of others.
Copyright © 2001, Intel Corporation.	Intel Literature Center: 1-800-548-4725
0901/SJ/DMW/MD/PP/15K	ORDER NUMBER 283951-001