Intel 325152002US, SSDSA2CW160G310 5.0 Supported Command Sets

Intel® Solid-State Drive 320 Series

Intel® Solid-State Drive 320 Series

Product Specification September 2011

16 Order Number: 325152-002US

Intel® Solid-State Drive 320 Series

5.0 Supported Command Sets

The Intel SSD 320 Series supports all the mandatory ATA (Advanced Technology

Attachment) commands defined in the ATA8-ACS specification described in this section.

5.1 ATA General Feature Command Set

The Intel SSD 320 Series supports the ATA General Feature command set (non-

PACKET), which consists of:

• EXECUTE DEVICE DIAGNOSTIC

• FLUSH CACHE

•IDENTIFY DEVICE

Note: See Appendix A, “IDENTIFY DEVICE Command Data” on page26 for details on the sector data

returned after issuing an IDENTIFY DEVICE command.

•READ DMA

•READ SECTOR(S)

• READ VERIFY SECTOR(S)

•SEEK

• SET FEATURES

•WRITE DMA

• WRITE SECTOR(S)

•READ MULTIPLE

•SET MULTIPLE MODE

•WRITE MULTIPLE

The Intel SSD 320 Series also supports the following optional commands:

• READ BUFFFER

• WRITE BUFFER

•NOP

• DOWNLOAD MICROCODE

5.2 Power Management Command Set

The Intel SSD 320 Series supports the Power Management command set, which

consists of:

•CHECK POWER MODE

•IDLE

• IDLE IMMEDIATE

•SLEEP

•STANDBY

• STANDBY IMMEDIATE

Contents

Main Intel Solid-State Drive 320 Series Product Specification Intel Solid-State Drive 320 Series Product Specification September 2011 2Order Number: 325152-002US Ordering Information Contact your local Intel sales representative for ordering information. Contents Page 1.0 Overview 2.0 Product Specifications 2.1 Capacity 2.2 Performance Table 1. User Addressable Sectors Table 2. Random Read and Write Input/Output Operations Per Second (IOPS) 2.3 Electrical Characteristics 2.4 Environmental Conditions Table 5. Operating Voltage and Power Consumption Table 6. Temperature, Shock, Vibration 2.5 Product Regulatory Compliance 2.6 Reliability 2.7 Hot Plug Support 3.0 Mechanical Information 3.1 1.8-inch Form Factor 3.2 2.5-inch Form Factors Page 4.0 Pin and Signal Descriptions 4.1 Pin Locations Signal Segment S1 Power Segment P1 4.1.1 1.8-inch Form Factor Pin Locations 4.1.2 2.5-inch Form Factor Pin Locations 4.2 Signal Descriptions 4.2.1 Connector Pin Signal Definitions 4.2.2 Power Pin Signal Definitions Table 9. Serial ATA Connector Pin Signal Definitions 1.8-inch and 2.5-inch Form Factors Table 10. Serial ATA Power Pin Definitions 1.8-inch Form Factor Table 11. Serial ATA Power Pin Definitions 2.5-inch Form Factor 5.0 Supported Command Sets 5.1 ATA General Feature Command Set 5.2 Power Management Command Set 5.3 Security Mode Feature Set 5.4 SMART Command Set 5.4.1 SMART Attributes Tab le 13 defines the SMART Attribute status flags. Table 12. SMART Attributes (Continued) Table 13. SMART Attribute Status Flags 5.4.2 SMART Logs 5.5 Device Statistics 5.6 SMART Command Transport (SCT) 5.7 Data Set Management Command Set 5.8 Host Protected Area Command Set 5.9 48-Bit Address Command Set 5.10 Device Configuration Overlay Command Set 5.11 General Purpose Log Command Set 5.12 Native Command Queuing 5.13 Software Settings Preservation 6.0 Certifications and Declarations Tab le 15 describes the Device Certifications supported by the Intel SSD 320 Series. Tab le 16 identifies the standards information referenced in this document. 7.0 References Table 15. Device Certifications and Declarations 8.0 Terms and Acronyms 9.0 Revision History Appendix A IDENTIFY DEVICE Command Data Page Table 18. Returned Sector Data (Continued)