Intel® Solid-State Drive 530 Series (M.2)
Product Specification September 2013
20 Order Number: 329213-002US
5.4 SMART Command Set The Intel SSD 530 Series supports the SMART command set, which consists of:
• SMART READ DATA
• SMART READ ATTRIBUTE THRESHOLDS
• SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE
• SMART SAVE ATTRIBUTE VALUES
• SMART EXECUTE OFF-LINE IMMEDIATE
• SMART READ LOG SECTOR
• SMART WRITE LOG SECTOR
• SMART ENABLE OPERATIONS
• SMART DISABLE OPERATIONS
• SMART RETURN STATUS
5.4.1 SMART Attributes
Table 12 lists the SMART attributes supported by the Intel SSD 530 Series; Table 13 lists the
corresponding status flags and threshold settings .
Table 12: SMART Attributes
ID Attribute Status Flags Threshold
SP EC ER PE OC PW
05h
Re-allocated Sector Count
The raw value of this attribute shows the
number of retired blocks since leaving the
factory (grown defect count) .
1 1 0 0 1 0 0 (none)
09h
Power-On Hours Count
The raw value reports two values: the first
4 bytes report the cumulative number of
power-on hours over the life of the device,
the remaining bytes report the number of
milliseconds since the last hour increment.
The On/Off status of the Device Initiated
Power Management (DIPM) feature will
affect the number of hour s reported. If DIPM
is turned On, the recorded value for
power-on hours does not include the time
that the device is in a "slumber" state. If
DIPM is turned Off, the recorded value for
power-on hours should match the clock
time, as all three device states are counted:
active, idle and slumber.
1 1 0 0 1 0 0 (none)
0Ch
Power Cycle Count
The raw value of this attribute reports the
cumulative number of power cycle events
over the life of the device.
1 1 0 0 1 0 0 (none)