Intel TIGH2U manual TMLPMOUNT4x/5x feature comparison, TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT52

TMLPMOUNT41, TMLPMOUNT51 and TMLPMOUNT52

TMLPMOUNT41/51/52 series mounts Intel® Communication Rack Mount Servers to 2- post or 4-post racks.

TMLPMOUNT41 and TMLPMOUNT51 are used for mounting servers on 19” wide racks. These racks are considered standard EIA (universal hole spacing) racks.

TMLPMOUNT52 is used for mounting servers on 23” wide racks. These racks could be standard EIA (universal or wide hole spacing) or ETSI (European) racks.

TMLPMOUNT41/51/52 series are designed with a slide-in rail-type system. Although the mounts are designed as rails, they are not sliding rails. This means the servers can be slid into the racks for installation purpose, but the rails are not designed to support a mounted server during service.

TMLPMOUNT4x/5x feature comparison

	Slide pull-out locking feature	Slide interface material	4-post rack hole spacing
TMLPMOUNT41	1	Plastic	EIA-Universal
	No	strips2
TMLPMOUNT51	Yes	Xylan	EIA-Wide or EIA-
		coating3	Universal4
TMLPMOUNT52	Yes	Xylan	EIA-Wide, EIA-
		coating3	Universal or ETSI

2U-tall nut bar

Not

included

Included5

Included5

2-post chassis securing screw location	"HP Mulan rack interference"
Side	Interference
access6
Front	No
access	Interferance
Front	N/A
access

Notes:

1.Extra care must be exercised with TMLPMOUNT41 to securely hold the server with one's hands when sliding it out of the rack, else the server may fall to the ground as its being removed.

2.Plastic strips on TMLPMOUNT41 have peeled off in some customer installations. Consequence: The parts are usable, but the server may have somewhat of a "scrape-in feel" rather than "slide in". Also, the rails will fit sloppier, so the side-located chassis securing screws may be difficult to align in 2-post installations. Replacement material is available from the plastic strip manufacturer.

3.Xylan is a tough, low-friction coating similar to Teflon.

3/28/2008 v 1.2 15 of 20