TM
intelligent motion systems, inc.
Excellence in MotionTM
MD-CC100-000
Parameter Setup Cable
370 N. MAIN ST., PO BOX 457, MARLBOROUGH, CT 06447
PH: (860)
Internet: www.imshome.com,
D e s c r i p t i o n
The
This cable plugs in easily to connect a standard
S P I P i n A s s i g n m e n t s
|
| 10 Pin Header | |
Pin # | Pin Name |
| Description |
1 | N/C |
| No Connect |
2 | N/C |
| No Connect |
3 | N/C |
| No Connect |
4 | CS |
| Chip Select |
5 | GND |
| Communications Ground |
6 | +5VDC |
| +5VDC Output (See Warning Below) |
7 | MOSI |
| Master Out – Slave In |
8 | CLK |
| Clock |
9 | N/C |
| No Connect |
10 | MISO |
| Master In – Slave Out |
WARNING! The +5VDC output is used for the setup cable ONLY! This output is not designed to power external devices!
WARNING! DO NOT connect or disconnect the
P a r a m e t e r S e t u p C a b l e U s a g e
The
MDrive14*
MDrive17 Microstepping* and Speed Control Versions
MDrive23 Microstepping* and Speed Control Versions
MDrive34 Microstepping and Speed Control Versions
*The MDrive14, MDrive17C and MDrive23C are equipped with C Connector and require an Adapter Cable to interface with the
S P I I n t e r f a c e
| PIN 4 | - CS |
|
| |
GND - PIN 5 | PIN 6 | - +5VDC OUT |
|
| |
| PIN 8 | - CLOCK |
|
| |
MOSI - PIN 7 |
|
|
|
| |
| PIN 10 - MISO |
| |||
|
|
|
| ||
10 Pin Header |
|
| PC Parallel/SPI Port | ||
2 | 3 | 4 | |||
P2 |
| ||||
|
|
|
| 19 | |
|
|
| 15 |
| |
|
|
|
| Ground |
For More Information:
See each product’s complete manual
on the IMS Product CD or at www.imshome.com
D e t a i l s
| Pin 1 |
|
| Pin 2 | - SPI Clock |
Pin 15 - MISO | Pin 3 | - MOSI |
| Pin 4 | - SPI Chip Select |
Pins |
|
|
Ground |
|
|
To Customer PC
Parallel/SPI Port
To 10 Pin Header
Red Wire
# 1 Pin
Cable Length
6 Feet (1.8 M)
Standard
Parallel/SPI Connector
Revision 102104 | Copyright © |