Intellinet Network Solutions 503358 ports & indicators, FCC Warning, CE Mark Warning, Ports

FCC Warning

This device has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and radiates radio frequency energy and, if not installed and used in accordance with the user manual, may cause interference, which the user will be required to correct at his own expense.

CE Mark Warning

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures to correct.

ports & indicators

Ports

The eight RJ-45 connections on the front panel (at right in image below) match workstations, servers or other network devices to 10/100 Mbps switching ports that sense 10/100M speed and automatically negotiate full/half duplex mode, allowing you to connect the switch to 10Base-T and 100Base-TX devices. NOTE: The eight ports are also capable of 48 V power-injector PSE (power source equipment) function (see Connections).

				2	4	6	8
2	4	6	8
PoE
LINK/ACT
PoE
POWER
LINK/ACT				1	3	5	7
1	3	5	7