•Autoscan Period: specifies the functions’s delay time.
•Title Bar: specifies the bar’s
position: Left, Right, Disable.
•Hotkey: specifies the hotkey preceding sequence
(SCROLL LOCK, CAPS, ESC, F12 or NUM LOCK).
•Password: enables/disables password protection.
•Load Default: lets you load the default settings.
•Enable Remote Console / Disable Remote Console: toggles between
these two options. If the remote console is off (disabled), an OSD reminder will display below the title bar.
Video Setting Menu:
•Gain: lets you specify the gain level (00-50).
•Equ: lets you specify the equalization level (00-50).
•To adjust the VGA setting: Go to Main/Video Setting, then begin to adjust Gain and Equalization. You may
need to try several combinations before you find a preferred setting.
Status Menu:
This screen presents the unit- specific bank number, firmware version, KVM switch model and the maximum number of ports. In a
