computer‘s setup and installation guide.
3.Secure the card to the rear of the computer chassis and
put back the computer cover.
4.Connect the product to other 10Mbps or 100Mbps network card using
5.The hub provides a switch for port 4 optional normal or
uplink function. The uplink is making it easy to link two
hubs together.
LED Indicators
The Hub card is equipped with LED indicators to provide for display of the card status and enable diagnosis of system problems.
Link/Activity status LED : Green .
When a link window is detected, this LED will light up, showing that the link is good. If this indicator is OFF, check
PWR/Power/Activity : Green.
Upon power on, this LED is ON. It is flashing at certain time intervals, to show network activity.
Software Configuration & Driver Installation
Please refer to the readme.txt or driver.txt provided in the diskette for detail description in running the
4
