Thank you for purchasing the INTELLINET NETWORK SOLUTIONSWireless 802.11n Broadband Router, Model 523967.

This Quick Install Guide presents the rudimentary steps required to set up and operate this device. For specifications and more detailed instructions, refer to the user manual 1) on the CD enclosed with this product; 2) on the Web site listed below; or 3) in some cases, printed and enclosed with this product. Contact your INTELLINET NETWORK SOLUTIONS dealer with comments or questions, or visit www.intellinet-network.com for information on the latest software and firmware updates, related products and additional contact information.

Safety Information

For the safety of users and their equipment, follow these safety guidelines:

This device is for indoor use only; DO NOT place this router outdoors.

DO NOT place this device in or near excessive heat or humidity.

DO NOT yank any connected cables; disconnect them gently.

If placing thisdevice at heights or on a wall, make sure it’s firmly secured to prevent damage possible injury.

Router parts, such as antennas or the power supply, are dangerous should children put the small parts in their nose or mouth. KEEP THIS DEVICE OUT THE REACH OF CHILDREN!

The router will become hot when used a long time. This is normal and is not a malfunction. Keep the router away from paper, cloth and other flammable materials.

There’s no user-serviceable part inside the router. If you find that the router is not working properly, contact your dealer (place of purchase) and ask for help. DO NOT disassemble the router. Doing so will void the warranty.

If the router falls into water while turned on, DO NOT touch it to remove it! Turn off its power source before you do anything, or contact an experienced technician for help.

If you smell something strange or see smoke coming out of the router or power supply, remove the power supply or turn the power off immediately, then call the dealer for help.



Page 3
Image 3
Intellinet Network Solutions 523967 manual Safety Information, Do not yank any connected cables disconnect them gently