4.Check all LEDs on the front panel. The PWR LED should be on, and the WAN and LAN LEDs should be on if the computer or network device connected to the corresponding router port(s) are powered on and correctly connected.
5.Connect your computer to one of the LAN ports of the router, then activate the network connection. Start the Web browser — e.g., MS Internet Explorer — and open
http://192.168.2.1 to display a login window.
6.Enter “admin” for username and “1234” for password.
Additional install instructions — as well as explanations for all the setup options — can be found in the user manual on the enclosed CD.
Safety Guidelines
•Do not place this router outdoors or near excessive heat or humidity.
•Do not yank any connected cables; disconnect them gently.
•If placing this device at heights or on a wall, make sure it’s firmly secured to prevent damage or possible injury.
•Router parts (antenna, power supply, etc.) are dangerous should children put them in their nose or mouth. Keep out of the reach of children!
•It’s normal for the router to become hot when used a long time, so keep . the router away from paper, cloth and other flammable materials.
•There’s no
•If the router falls into water while turned on, Do not touch it to remove it! Turn off its power source before you do anything, or contact an experienced technician for help.
•If smoke or strange odors emanaye from the router or power supply, remove the power supply or turn the power off immediately.
3
