WIRELESS NETWORK IP CAMERA User’s Guide
7. Type ‘c’ key to change the network configuration in [Boot] prompt. If you type ‘c’ key,
Wireless Network IP Camera shows you the information you can change its values and the
current assigned values. You can change as the following figure.
8. When you terminate hyper-terminal program after you changed network configuration,
hyper-terminal program asks you whether you save the session. If you save the session, you
can re-use the hyper-terminal. To re-use the session you saved, click Start --> Programs -->
Accessories --> Communications --> HyperTerminal --> Wireless Network IP Camera.. ht in
the case of Windows 2000.
21