3.Remove the drawer.
Leveler adjustment holes are located at each side of the bottom shelf.
4.Insert a flathead screwdriver to make contact with the leveler head.
When performing step 5, ensure that both levelers are raised/lowered to the same height to ensure the door will open and close properly.
5.Perform one of the following:
• Turn leveler screws clockwise to raise unit.
• Turn leveler screws counter clockwise to lower unit.
6.Reinstall drawer.
Leveler
Adjustment
Hole
| Bottom Shelf | Leveler | |
Leveler | Adjustment | ||
| |||
Leveler | Hole | ||
|
FIGURE 1 Usage
Armoire/Wardrobe With No Drawers
For this procedure, refer to FIGURE 1.
1.Open the door(s) and locate two plastic plugs at each side of the bottom shelf.
2.Pry out the plugs with a flat screwdriver.
3.Insert the flat screwdriver into the holes to make contact with the leveler head.
When performing step 4, ensure that both levelers are raised/lowered to the same height to ensure the door will open and close properly.
4.Perform one of the following:
• Turn levelator screws clockwise to raise unit.
• Turn levelator screws counter clockwise to lower unit.
5.Replace plastic plugs.
Leveler Instructions | 2 | Part No 1171786 |
