ANTI-THEFT DEVICE

Assembly, Installation and Operating Instructions

Model No. 1514

NOTE: Check all parts for shipping damage before using. In case of damage, do NOT use. Contact the Dealer/Carrier for further instructions.

SAFETY SUMMARY

The following recommendations are made for the installation of the anti-theft device:

WARNING

DO NOT assemble or use this equipment with- out first reading and understanding this instruc- tion sheet. If you are unable to understand the warnings, cautions or instructions, contact a healthcare professional, dealer or technical personnel before attempting to install this equipment - otherwise, injury or damage may occur.

NEVER maneuver an occupied wheelchair by using ANY part of the anti-theft device. Seri- ous injury or damage can occur. ALWAYS use the handles of the wheelchair when maneu- vering an occupied wheelchair.

INSTALLING THE ANTI-THEFT DEVICE (FIGURE 1)

1.Remove the upper four (4) phillips screws and washers that secure the back upholstery to the back canes.

NOTE: Phillips screws and washers will be reused.

2.Position the anti-theft device brackets with the back upholstery screw holes.

3.Install the phillips screws through the washers, anti-theft device brackets, back upholstery and into the back canes.

4.Tighten the four (4) phillips screws securely.

Anti-Theft

Device

 

Phillips Screws

Back Cane

and Washers

 

This kit contains the following:

DESCRIPTION

QTY

Anti-Theft Bar

1

Instruction Sheet

1

 

 

Back Upholstery

Anti-Theft

Device Bracket

FIGURE 1 - INSTALLING THE ANTI-THEFT DE-

VICE

Invacare Corporation

www.invacare.com

USA

Canada

One InvacareWay

5970 ChedworthWay

Elyria, Ohio USA

Mississauga, Ontario

44036-2125

L5R 3T9, Canada

800-333-6900

905-890-8838

Invacare is a registered trademark of Invacare Corporation. ©1999 Invacare Corporation

Form No. 84-63 Part No. 1003365 Rev D (1) 1/00

Page 1
Image 1
Invacare 1514 operating instructions Safety Summary, Installing the ANTI-THEFT Device Figure, Description QTY