Non-Removable Device
Assembly, Installation and Operating Instructions
Model No. 1820
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
Safety Summary
To ensure the safe installation of the
WARNING
DO NOT install this equipment without first reading and understanding this instruction sheet. If you are unable to understand the warnings, cautions and instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install this equipment - otherwise, injury or damage may occur.
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.
After ANY adjustments, repair or service and BEFORE use, make sure that all attaching component parts are secure.
Installing Non-Removable Device
NOTE: For this procedure, refer to FIGURE 1 on page 3.
1. Install front rigging onto the wheelchair.
CAUTION
It may be necessary to widen the opening of the clamp to prevent scratching the wheelchair frame.
NOTE: There is a right clamp and a left clamp. Ensure that the clamp tab is at the bottom of the clamp before installing.
2.Follow one of the following instructions:
•Footrest - Position the clamp between the two hinge plates of the footrest (Detail “A”).
•Elevating Legrest - Position the clamp above the upper hinge plate of the elevating legrest (Detail “B”).
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Part No 1076733 | 1 |
