Invacare 2GTR, 2GR manual S. Curved Back without Mounting Hardware

A.B.S. Curved Back without Mounting Hardware

Tilt Only (2GT)

NOTE: Overall back height is calculated by measuring from the seat pan surface to the top of the back pan. Back pan material height can be calculated by subtracting 3-3/4" from the overall back height listed. Material height listed is rounded off to the nearest whole number.

NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.

This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.

Form No. 03-026

42

To order call toll free 1-800-333-6900, or www.invacare.com