Invacare 9669 installation instructions Replacing the Armrests, Cleaning and Lubrication

WARNING

When repositioning arm(s) to the locked position, ensure that the bottom portion of the arm latch rests on top of the pin on the upright portion of the leg tube. The arm will then be positioned for use.

5. Reverse STEPS 1-3 to reposition arm(s) into the locked position.

Drop Arm	DETAIL “A”
Tube	Drop Arm Tube
Arm Latch
(Locked)	Arm Latch
	(Unlocked)
Pin	Pin
	Upright
	Leg Tube

DETAIL “B”

Drop Arm Tube

Arm

LatchPin

Upright

Leg Tube

FIGURE 3 Operating the Drop Arms

Replacing the Armrests

NOTE: For this procedure, refer to FIGURE 4.

Armrest

1.Remove the two Phillips® screws from the underside of each drop arm tube.

2.Lift armrest from each drop arm tube.

3.Reverse STEPS 1-2 to install/reinstall the armrests.

Drop Arm

Tube

Phillips

Screws

FIGURE 4 Replacing the Armrests

Cleaning and Lubrication

Cleaning

Clean with a damp cloth and non-abrasive cleanser.

Lubrication

To make raising or lowering the seat/lid easier, you may lubricate the commode back frame rail with a very small amount of petroleum jelly or furniture polish.

Part No 1062011 3 Drop Arm Commode