ADJUSTING THE LEG EXTENSIONS
WARNING
Ensure that the shower chair is level and stable before using.
NOTE: Refer to WARNINGS in the SAFETY SUMMARY of this instruction sheet.
NOTE: For this procedure, refer to FIGURE 2.
1.Ensure the legs are attached. Refer to Attaching the Legs on page 2.
2.Place seat and legs upside down so legs are facing up.
TO INCREASE LEG HEIGHT
1.Hold one (1) leg with a hand. With the other hand, hold the leg tip and leg extension. Refer to FIGURE 2.
2.Rotate the leg extension COUNTERCLOCKWISE.
3.Use the number reference in the leg extension slot to adjust the leg height.
4.Repeat STEPS 1‐3 for remaining three (3) legs.
NOTE: Ensure that all four legs are adjusted to the same height.
TO DECREASE LEG HEIGHT
1.Hold a leg with one hand while cupping the leg tip and holding the leg extension with the other hand.
2.Rotate the leg extension
CLOCKWISE.
3.Use the number reference in the leg extension slot to aide in adjusting the leg height. Refer to FIGURE 2.
4.Repeat STEPS 1‐3 for remaining three (3) legs.
NOTE: Ensure that all four legs are adjusted to the same height.
Leg Number
Reference in
Leg Extension
Slot
Leg
Extension
Leg Extension
Slot
FIGURE 2 - ADJUSTING THE LEG
EXTENSIONS
INSTALLING/REMOVING THE BACKREST
NOTE: Refer to WARNINGS in the SAFETY SUMMARY of this instruction sheet.
NOTE: For this procedure, refer to FIGURE 3.
INSTALLING
1.Before installing the backrest, attach and adjust the legs so the shower chair is level. Refer to Attaching the Legs on page 2 and Adjusting the Leg Extensions on page 3.
Part No 1122173 | 3 | IVC™Heavy Duty Shower Chair |
