ProSPIN™X4™Caster Swivel Locks
Assembly, Installation and Operating Instructions
Model No. A1541
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.
Safety Summary
To ensure the safe and proper installation of the caster locks, these instructions MUST be followed:
WARNING
DO NOT use this equipment without first reading and understanding this instruction sheet and the owner’s manual supplied with wheelchair. If you are unable to understand the warnings, cautions and instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install this equipment - otherwise, injury or damage may occur.
ALWAYS consult with your physician or therapist to determine proper adjustment and usage.
Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.
ALWAYS engage both front caster swivel locks and both rear wheel locks before transferring to and from the wheelchair - otherwise injury or damage may occur.
Positioning the Front Casters
NOTE: For this procedure, refer to FIGURE 1.
1.Position both casters to face the front or rear of the wheelchair to align the front or rear lock plate hole with the caster lock assembly.
NOTE: It is recommended that the front casters be positioned toward the front of the wheelchair for additional stability when transferring.
Caster Lock
Assembly
Lock Plate Hole
Caster
FIGURE 1 Positioning the Front Casters
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
Part No 1134875 | 1 | ProSPIN™X4™Caster Swivel Locks |