Part No 1164890 3Oxygen Holder

3 Usage

3.1 Using the Oxygen Holder
1. If necessary, loosen but DO NOT remove the mounting knob.
2. Install the oxygen holder into the accessory tube.
3. Install the mounting knob to secure the oxygen holder to the accessory tube.
4. Loosen the two adjustment knobs.
5. Install the oxygen cylinder into the oxygen holder.
6. Tighten the two adjustment knobs to secure the oxygen cylinder to the oxygen holder.
FIGURE 1 Using the Oxygen Holder
For this procedure, refer to FIGURE 1.
Reverse STEPS 1-3 to remove the oxygen holder.
Oxygen Holder
Accessory Tube Mounting Knob
Adjustment
Knob
Adjustment Knob