Invacare PTO-STM manual #3 Back Assembly with Hardware - 19 W to 22 W, A.B.S. Curved Back Assembly

A.B.S. Curved Back Assembly

NOTE: Hook Fastener Adhesive Kit must be ordered when a Back Pan or Back Assembly is requested.

This will allow the Loop Fastener Adhesive on the Back Cover to attach properly.

NOTE: A.B.S. Curved Back mounts only to Storm Series back canes without a 10 degree bend.

NOTE: Back cover and foam are sold as a Back Cushion Assembly only.

#3 Back Assembly with Hardware - 19" W to 22" W

Overall				Material		19" Wide	20" Wide	21" Wide			22" Wide
Back Height				Back Height
	15"			11"		1107002	1107012	1107022			1107032
	16"			12"		1107003	1107013	1107023			1107033
	17"			13"		1107004	1107014	1107024			1107034
	18"			14"		1107005	1107015	1107025			1107035
	19"			15"		1107006	1107016	1107026			1107036
	20"			16"		1107007	1107017	1107027			1107042
	21"			17"		1107008	1107018	1107028			1107043
	22"			18"		1107009	1107019	1107029			1107044
	23"			19"		1107010	1107020	1107030			1107045
	24"			20"		1107011	1107021	1107031			1107046
Item										Quantity Per
Number		Note		Part Number	Description				Package			Assembly
1				See Chart	#1 Back Pan 16"-18"				1				1
1				See Chart	#1 Back Pan 19"-22"				1				1
2				See Chart	#2 Back Cushion Assembly 16"-18"				1				1
2				See Chart	#2 Back Cushion Assembly 19"-22"				1				1
3				See Chart	#3 Back Assembly with Hardware 16"-18"				1				1
3				See Chart	#3 Back Assembly with Hardware 19"-22"				1				1
NOTE:		A	1125723		Kit, Hook Fastener w/ Adhesive Back				1				1
	A	- Not Shown. Hook Fastener Adhesive Kit is used to attach the Back Cover to the Back Pan and must be ordered										when a
		new Back Pan or Back Assembly is requested.

Form No. 01-038

43

To order call toll free 1-800-333-6900, or www.invacare.com