Operating Tilt only Systems Figure | Invacare Recline specification

PROCEDURE 3	TILT ONLY

L T

O N L Y

This Procedure Includes the Following:

Operating Tilt Only Systems

OPERATING TILT ONLY SYSTEMS (FIGURE 1)

WARNING

NEVER operate the wheelchair while in any tilt/back angle combination over 20o RELA- TIVE TO THE VERTICAL POSITION. If the drive lock-out does not stop the wheelchair from operating in a tilt/back angle combination 20o RELATIVE TO THE VERTICAL POSITION, DO NOT operate the wheelchair. Have the wheelchair serviced by a dealer or quali- fied technician.

Use only TSS, SAC, TRSS and TRCM actuator controls to activate the tilt/recline functions. DO NOT USE any other actuator controls. Such devices may result in excess heating and cause damage to the actuator and as- sociated wiring and could cause a fire, death, physical injury or property damage. If such devices are used, Invacare shall not be liable and the warranty is void.

A Note About Drive Lock-Out

Drive lock-out is a feature designed to prevent the wheel- chairfrombeingdrivenwhileinanyrecline/backanglecom- bination over 20o RELATIVE TO THE VERTICAL POSI- TION. When the drive lock-out feature has been activated, the LED on the single function toggle switch will light.

NOTE: The tilt angle range is from 0o to 45o with a 0o seat- to- floor angle and 5o to 50o with a 5o seat-to-floor angle.

Single Function Toggle Switch

INCREASING TILT ANGLE.

1. Make sure the wheelchair is on a level surface.

2.Pull single function toggle switch back towards rear of the wheelchair until the desired angle is achieved.

DECREASING TILT ANGLE.

1.Pushthesinglefunctiontoggleswitchforwardtowards the front of the wheelchair until the desired angle is achieved.

Optional Four-Way Toggle Switch

INCREASING/DECREASING TILT ANGLE.

1.Make sure the wheelchair is on a level surface.

2.Push four-way toggle switch forward towards the front ofthewheelchairuntilthedesiredtiltangleisachieved.

NOTE: If the wheelchair is equipped with switch op- tions, scan to the correct ECU or Auxiliary Mode and activate the control device in the correspond- ing “forward” direction to operate the tilt function. Refer to the MKIV owner's manual, part number 1043576 for complete switch option operating instructions.

3. Release four-way toggle switch to neutral position.

NOTE: The four-way toggle switch will alternate functions (increase tilt angle, decrease tilt angle) after it has been released to the neutral position for a minimum of one (1) second.

NOTE: Refer to the MKIV owner's manual, part num- ber 1043576 for complete four-way toggle switch op- erating instructions.

Recline specifications

Invacare Recline is a sophisticated and highly adaptable wheelchair designed to enhance the quality of life for users who require recline functionality. Its design focuses on comfort, safety, and ease of use, making it an excellent choice for individuals with various mobility challenges.

One of the standout features of the Invacare Recline is its adjustable reclining backrest. This allows users to find their ideal position, whether they are relaxing, resting, or engaging in daily activities. The backrest can be adjusted effortlessly, often by using a lever or pneumatic mechanism, providing a seamless transition from an upright to a reclined position. This feature is particularly advantageous for users who may experience pressure sores or require occasional changes in posture throughout the day.

The wheelchair is equipped with a durable and lightweight frame, making it easy to maneuver both indoors and outdoors. The construction often includes high-strength aluminum or steel, ensuring stability and longevity while also maintaining a manageable weight for caregivers. This balance of strength and portability enhances the user experience, allowing for a greater degree of independence.

Another important aspect of the Invacare Recline is its customizable seating system. The seating can be tailored to the specific needs of the user, with various options for cushions, back supports, and armrests. This customization not only improves comfort but also promotes optimal positioning and postural support, essential for users who may have specific medical needs.

Incorporating advanced technology, some models of the Invacare Recline include powered options, which allow users to adjust their position with the push of a button. These electric systems are particularly beneficial for individuals with limited upper body strength, enabling them to control their posture and comfort without assistance.

Safety features are paramount in the design of the Invacare Recline. It commonly includes secure locking mechanisms for wheels, anti-tipper features, and safety straps, ensuring that users are secure while reclining or maneuvering. The careful consideration of safety is essential to instill confidence in both users and caregivers.

Overall, the Invacare Recline wheelchair exemplifies innovation and thoughtful design, combining adjustable reclining capabilities with robust technology and customization options. It stands out in the market for its commitment to improving user comfort and independence, ultimately enhancing the quality of life for individuals with mobility challenges.

Invacare Recline manual Operating Tilt only Systems Figure, Single Function Toggle Switch

Models: Recline