Invacare RHL450-1 instruction sheet Safety Summary, Installing Rubber Tips on the Hanger Bar

Rubber Tips for Patient Lifts

Assembly, Installation and Operating Instructions

Model Nos. RHA450-1, RHL450-1, RPA450-1, RPA450-1E, RPL450-1, RPL450-1E,

RPA600-1, RPA600-1E, RPL600-1

SAVE THESE INSTRUCTIONS

NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact Carrier/Invacare for further instructions.

Safety Summary

To ensure the safe and proper installation of the Rubber Tips, these instructions MUST be followed:

WARNING

DO NOT install this equipment without first reading and understanding this instruction sheet. If you are unable to understand the warnings, cautions and instructions, contact a healthcare professional, dealer or technical personnel if applicable, before attempting to install this equipment - otherwise, injury or damage may occur.

Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products.

Installing Rubber Tips on the Hanger Bar

NOTE: For this procedure, refer to FIGURE 1.

1.Align the rubber tip with the end of the hanger bar hook.

2.Firmly press the rubber tip onto the hanger bar hook.

3.Ensure the rubber tip is pressed all the way onto the hanger bar hook by flexing it. NOTE: A blunt tool may be used to press the rubber tip on.

4.Repeat STEPS 1-3 for the remaining hanger bar hooks.

DETAIL “A” - 450 LBS. LIFTSHanger Bar

Hanger Bar

Hook

Rubber

Tip

DETAIL “B” - 600 LBS. LIFTSHanger Bar

Rubber Tip

Hanger Bar Hook

FIGURE 1 Installing Rubber Tips on the Hanger Bar

For more information regarding Invacare products, parts, and services,

please visit www.invacare.com

Part No 1134795 1 Rubber Tips for Patient Lifts