25
6.2 Driving the Scooter
Switch on the power supply (key switch). The displays on the Control Panel light up. The
scooter is ready to drive.
NOTE
If the scooter does not respond after switching on, check the status display (see chapter "Status
display" on page 23 and chapter "Diagnostics and Trouble Shooting" on page 26).
Set the driving speed with the speed adjustment knob.
Gently pull the right driving lever towards you to drive forwards.
Gently pull the left driving lever towards you to drive backwards.
NOTE
The controller is programmed with standard values ex-works. Your Invacare® Dealer can
program it to fit your requirements.
NOTE:
To brake quickly, simply let go of the driving lever. It will automatically return to the middle
position. The scooter will brake.