Invacare Taurus manual 235$7,1*2856&2275

23(5$7,1*<2856&227(5

Before beginning your journey with your new scooter, make sure that the scooter is on a level surface and clear of any obstacles. Although your scooter is able to climb slopes, it is safer to practice on a level surface.

You can make the following adjustments to increase your comfort when driving:

zadjust seat height and location.

zadjust the armrest width.

zadjust the tiller angle.

1. Before operating your scooter, check the following:

xfree-wheeling device is in drive position.

xspeed dial is at the picture of the turtle.

2.Sit on scooter and turn on the key. All battery gauge LED Lights should be lit. The self-diagnostic warning lights should not be blinking.

3.When your hands rest comfortably on the handlebars, the thumb control levers should be within reach. The right lever moves the scooter forward, the left one moves it backward. When you release the thumb lever, the scooter will stop.

NOTE: This scooter has an automatic braking systems. Release the thumb control and the brakes will stop the scooter.

4.Steer the scooter by turning the whole tiller in the direction your want to go.

5.Practice driving where there are no obstacles. Start at the slowest speed and drive forward and backward; make some turns. As you get more comfortable you can increase the speed by turning the speed dial toward the picture of the rabbit.

6.If only two-battery gauge LED lights are lit, you should plan to recharge the batteries very soon.

7.If the scooter stops and does not function, locate the circuit breaker on the top of the battery pack. Push it and try the scooter again.

8.When you are finished riding, turn off the key before getting off.

7