Conventional Back without Mounting Hardware
(16" Wide) Non-Manual Tilt - TDX SPREE
Only the Back Assembly needs to be replaced when changing back heights.
NOTE: Hook Fastener w/ Adhesive Back Kit must be ordered when a Back Pan or Back Assembly is requested. This will allow the Loop Fastener w/ Adhesive on the Back Cover to attach properly.
Item |
|
|
|
|
|
|
| Quantity Per |
| |
Number |
| Note | Part Number |
| Description |
| Package | Assembly |
| |
1 |
|
| A | 1125564 |
| Back Assembly w/o Hardware (16" Wide x 15" High) |
| 1 | 1 |
|
2 |
|
| A | 1124578 |
| Back Pan (16" Wide x 15" High) |
| 1 | 1 |
|
3 |
|
| B | 1097397 |
| Back Cushion Assembly (17" Wide x 15" High) |
| 1 | 1 |
|
4 |
|
| C | 1125723 |
| Kit, Hook Fastener w/ Adhesive Back |
| 1 | 1 |
|
5 |
|
|
| 1125724 |
| Edge Trim, Vinyl Black (96" Long) |
| 1 | 1 |
|
NOTE: | A |
| Description reflects materials |
| actual width x height. Item is used for a 16" wide chair with an overall |
| back height of | 20" |
| |
|
|
|
| |||||||
| B | - Back cover and foam are sold as a back cushion assembly only. Description reflects actual back cushion material width x |
| |||||||
Height. Back Cushion will be 1" wider than the chair width and used for a chairs overall back height of 20".
C - Hook Fastener w/ Adhesive Back Kit is used to attach the Back Cover to the Back Pan and must be ordered when a new Back Pan or Back Assembly is requested.
Form No. 07-082
78
To order call toll free
