Invacare TorqueTM 3, TorqueTM SE, TorqueTM SP, Ranger XTM, Arrow manual 136

Motor/Gearbox Assembly Reference Chart

MKIV Electronics (4-Pole Before 10/9/06) & (GB Before 5/22/07)

NOTE: AConnector- Part #'skit)1153335/6. The brakeandreleaserefurbishedmechanism#'s are wasKits revisedincluding10/29/07a GB HDeliminatingMotor, Brakethe torsionLever Hardwarespring, addingand (Controllera bellville washerGasket and A1 - stop plate to limit travel of the brake lever to prevent permanent damage to the motor. The Controller Gasket Connector was introduced 10/26/07 and attaches to the controller motor cables. Instruction sheets included also.

B - Part #'s 1153648/9 and refurbished #'s are Kits including a GB HD Motor, Brake Lever Hardware, (Controller Gasket Connector kit) and

B1 - a revised Wheel Lock with longer mounting screws. Revised Wheel Lock used for chairs made before 10/29/07 equipped with Wheel Locks. The new Stop Plate and revised Wheel Lock now share the same mounting holes on the Suspension Arm

C - For chairs manufactured before 1/1/06 a RT. Suspension Arm Kit part #1153679 is required in addition to a motor assembly. Refer to the Suspension Arm Kits chart

D - For chairs manufactured before 1/1/06 a LT. Suspension Arm Kit part #1153680 is required in addition to a motor assembly. Refer to the Suspension Arm Kits chart

NOTE: GB motors were not available with the Arrow (301-401HD) user weight selection until 1/26/04 when the TTHD GB motors covered all

Arrow user weight limits STANDARD. NOTE: GB motors were not available with the Torque SP (301-351 TQHD) user weight selection until 1/26/04 when the user weight limit was raised to 400 Lbs.

Form No. 00-191

136

To order call toll free 1-800-333-6900, or www.invacare.com