FRONT
Warranty Information
This product carries a 1 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty or call
Register online at http://www.iogear.com/register
Important Product Information
Product Model _________________
Serial # _______________________
Contact
Toll Free
23 Hubble
Irvine, CA 92618 USA www.iogear.com support@iogear.com
About Us
FUN
IOGEAR offers connectivity solutions that are innovative, fun, and stylish, helping people enjoy daily life using our high technology products.
GREEN
IOGEAR is an environmentally conscious company that emphasizes the importance of conserving natural resources. The use of our technology solutions helps reduce electronic waste.
HEALTH
IOGEAR supports healthy and fit lifestyles. By integrating products with the latest scientific developments, IOGEAR’s solutions enhance the life of
© 2008 IOGEAR, INC.
Package Contents
| 1 | Bluetooth® Stereo Audio Transmitter |
| 1 | Mini USB 4 Pin Charging Cable |
| 1 | 3.5mm to ¼” Adapter |
| 1 | 3.5mm Audio Extension Cable |
| 1 | Full Range Power Adapter |
| 1 | European Prong Changer |
| 1 | Quick Start Guide |
| 1 | Warranty / Registration Card |
|
| |
| System Requirements | |
Quick Start Guide |
| |
• Available 3.5mm or ¼” Audio Jack | ||
• A2DP supported Bluetooth Stereo Headphone or Speaker | ||
Bluetooth®•Stereo Audio Transmitter
GBMA211
PART NO. Q1042
Overview | Start Here! | Pairing with GBMA211 | Operation |
1.Blue / Red LED
2.ON / OFF Button
3.3.5mm Audio Connector
4.
1. | Hold ON / OFF Button for 7 seconds on your GBMA211 when it is in OFF mode |
| to activate the pairing mode. GBMA211’s LED will be flashing blue and red |
| alternately. |
2. | Activate the pairing mode on your Bluetooth Headset / Headphone. (Please |
| refer to your Bluetooth Headset / Headphone’s user manual on how to activate |
| pairing mode.) |
3. | Wait for the GBMA211’s LED to flash blue only to confirm that the two devices |
Function | Button |
ON | Hold ON / OFF for 3 second when it’s OFF |
OFF | Hold ON / OFF for 6 second when it’s ON |
Pairing | Hold ON / OFF for 7 second when it’s OFF |
BACK
| 1 |
| 2 |
4 | 3 |
|
Charging GBMA211
Note: You have to fully charge the batteries for 6 hours before initial usage.
are connected to each other. Then you should be able to listen to music |
through GBMA211 with your Bluetooth Headset / Headphone. (For example, |
you can test to see if the GBMA211 is paired by plugging the 3.5mm or ¼” |
audio connector to your PC’s audio output. Then use any audio software to play |
your music to see you can hear any audio sound from your Bluetooth Headset / |
Headphone.) |
Connecting GBMA211 with audio source
1.Plug GBMA211 into the 3.5mm or ¼” audio jack of MP3 player or any audio source.
2.Turn on GBMA211.
3.Turn on your Bluetooth Headset / Headphone and wait for the blue LED to flash normally, then the two devices are successfully connected. (If GBMA211 cannot reconnect to any device after turning on for 1 minute, it will turn off automatically. Then please turn off both devices and move the device closer to each other then repeat step 3.)
Note: GBMA211 can only reconnect to the last connected device. If you have paired with another device before the one you currently want to use, please go to Pairing with GBMA211 to
4. | Now, you should be able to listen to music from the MP3 player or any audio |
| source. |
5. | Use the audio source’s Volume Up / Down control button to adjust the |
LED Definition
Blue LED
Red LED
Blue and Red LED
Description
Connected
Waiting to connect
Power On
Charging
Charging completed
Low battery
Power Off
Paring Mode
Flash normally
Flash slowly
Flash 3 times quickly
On
Off
Flash quickly every 5 second Flash 3 times quickly
Blue LED and Red LED flash alternately
1.Connect the mini USB charging cable to the GBMA211 and any open USB port on your PC. You can also charge GBMA211 via AC adapter.
2.The LED on the GBMA211 will light up in red indicating that it is being charged.
3.When the charging is completed, the red LED will go off.
Note: Please connect the cable directly to your PC and avoid connecting it through other devices, such as a USB hub.
volume. |
Note: You have to pair GBMA211 and the Bluetooth Headset / Headphone if you are trying to connect them for the first time. After the initial pairing process, GBMA211 will search and
Note: Before initial usage, we recommend that you fully charge GBMA211 for at least 2 hours.
