Iqua manual Switching on and off, Pairing the Snake 2 and your mobile phone

Switching on and off

•To switch on Snake 2

•Press and hold the button until the blue light starts blinking

•To switch off Snake 2

•Press and hold the button until the lights turn off

Pairing the Snake 2 and your mobile phone

Pairing is the process of linking Snake 2 with your Bluetooth-enabled mobile phone. After this process is completed, you can use the Snake 2 with this paired mobile phone. If you want to use the Snake 2 with another mobile phone, you must repeat the pairing process again. Even though Snake 2 can be paired with up to 8 compatible phones it can only be connected to one phone at a time.

1.Make sure Snake 2 is charged and turned OFF.

2.Press and hold down both the button and the button at the same time until you here a sound and the lights start flashing.

3.Release the buttons. Snake 2 is now in pairing mode waiting for your mobile phone to contact it.

4.Complete the pairing with your mobile phone. Please refer to the manual of your mobile phone for details on how to search and pair. When the mobile phone has found the handsfree device, the phone will show Iqua Snake 2 on its display. In order to pair with the phone, enter the PIN code of Snake 2, which is 0000.

5.Once pairing has been successful, you will hear a sound and the blue light will start blinking.

EN

8