Page 18 Installation and Operation Manual
NOTE
You can now use the arrow keys to move throughout the menu
system. Then:
1. When the menu item you want to change is displayed, press
[SELECT].
2. After changing the value, use the [STORE] key to temporarily
save the changes. If you make a mistake while entering
values, press the [MENU] key to return to the menu system
and restart.
3. To change another item, press the [UP/DOWN ARROW]
keys to display that item, and repeat steps 1 and 2.
4. After you are done, press the [RUN] key to lock in the
changes. Then press the [SELECT] key to return online.
You must press the [SELECT] key when RUN is displayed to
permanently save any changes you have made. If you do not, all
changes will be lost after two minutes of inactivity.
When RUN is displayed, you have two additional choices, REDO
and UNDO. Use the [UP/DOWN ARROW] keys to scroll
through the menu. Press the [SELECT] key to make your choice.
REDO puts the unit back into program mode to allow
further changes.
UNDO returns the unit online without making the changes
you may have entered.
RUN returns the unit online, saving all changes.