Jabra BT320s What your new headset can do, Getting Started, Charge your headset, Phone dependent

GB	What your new headset can do:
FR	The Jabra BT320s lets you listen to stereo music through your Bluetooth
	enabled mobile phone or music player, while ensuring that you never miss
ES	a call.
	Your Jabra BT320s has the following functions, when acting as a
PT	Bluetooth headset:
	• Pair with up to 8 devices
DE	•	Answer calls
	•	End calls
IT	•	Reject calls*
	•	Voice dialling*
NL	•	Last number redialing*
	•	Call waiting*
SU	• Place call on hold*
	* Phone dependent
NO	Specifications:
SE	• Talk time up to 6 hours/standby time up to 160 hours
	• Rechargeable battery with charging option from AC power supply
DK	• Weighs less than 40 grams (1 2/5 oz) incl. the original Jabra headphones
	• Operating range up to 10 meters (approx. 33 feet)
GR	• Supports Advanced Audio (A2DP), Remote Control (AVRCP), as well as
		handsfree and headset Bluetooth profiles

• Bluetooth specification 1.2 (See glossary page 13)

• IP22 compliant (The Jabra BT320s can withstand a short rain shower)

Please note that your Jabra BT320s can withstand a short rain shower but is not waterproof and cannot be submerged. If your device gets wet, it should be wiped clean of any traces of water in order to protect it from potential damage.

GETTING STARTED

The Jabra BT320s is easy to operate. The buttons performs different functions depending on how long you press them:

1. Charge your headset	GB
Make sure that your Jabra BT320s is fully charged for 2 hours before you start	FR
using it. Only use the charger provided in the box – do not use chargers from
any other devices as this might damage your Jabra BT320s.	ES
Connect the adapter as shown in fig. 2 to the AC power supply to charge
from a power socket.	PT
When the light indicator (LED) is solid red, your music adapter is charging.
When the light turns green, the headset is fully charged.	DE
2. Turn on your Jabra BT320s	IT
• Press the Answer/End button until you see a long green flash to turn
your headset on. If your headset is not paired with a device (see section	NL
3), the headset will flash green every 5 seconds. If your headset is
connected to a device, the headset will flash blue every 5 seconds.	SU
• Press and hold the Answer/End button until you see a long red flash to	NO
turn the device off.
3. Pairing with a phone or other device	SE
Before you use your Jabra BT320s you must pair it with a mobile phone or	DK
another Bluetooth enabled device.
1. Put the headset into pairing mode:	GR

•Make sure headset is turned off.

•Press and hold the Answer/End button until the light indicator (LED) is solid blue.

2.Set your mobile phone or other device to ‘discover’ the Jabra BT320s Follow your phones instruction guide. This usually involves going to a ‘setup’, ‘connect’ or ‘Bluetooth’ menu on your phone and selecting the option to discover or add a Bluetooth device. (See example from typical mobile phone in fig. 4).

3.Your phone will find the Jabra BT320s

Your phone will ask if you want to pair with it, accept this with “Yes” or “ok” and confirm with the passkey or PIN = 0000 (4 zero’s).

Instruction:

Tap

Press

Press and hold

Duration of press:

Press briefly and let go Approx: 1 second Approx: 5 seconds

Your phone will confirm when pairing is complete. In case of unsuccessful pairing repeat steps 1 to 3.

RELEASE YOUR JABRA

Jabra BT320s Bluetooth stereo headset