5
english
Jabra HaLO2
turnInG your Jabra haLo2 on an d off
unfolding the headset will turn it on.
folding the headset will turn it o.
- To fold: Carefully extend the headset at the hinges (3) and fold.
The headset will now conveniently fold into a compact size.
- To unfold: Carefully unfold the headset and lock the hinges into
place.
The headset will automatically turn o after 10 minutes if not
connected to a device.
PaIrInG your Jabra haLo2 to a Phone or other devICe
Headsets are connected to phones or other bluetooth devices
using a procedure called ‘pairing’. by following a few simple steps,
pairing can be done in a matter of seconds.
1. Put the headset in pairing mode
1.a. first time pairing
-
fold and unfold the headset and the Jabra HaLO2 will
automatically
enter pairing mode (indicator light (5) is solid
blue) and start searching for a device.
1.b. Later pairing
- Press and hold the answer/end button (1) until the indicator
light (5) is solid blue (approximately 4 seconds).
2. Set your Bluetooth phone or device to search for the
Jabra HALO2
- follow your phone’s instruction guide. first make sure that
bluetooth is activated on your mobile phone. Then set your
phone to search for the headset. This usually involves going
to a ‘setup,’ ‘ connect’ or ‘bluetooth’ menu on your phone and
selecting the option to search for or ‘add’ a bluetooth device.*
3. Your phone will nd the Jabra HALO2
- The phone will nd the headset under name “Jabra HaLO2”.
- your phone then asks if you want to pair with the headset.
- accept by pressing ‘yes’ or ‘Ok’ on the phone and conrm with
the passkey or PIn = 0000 (4 zeros). your phone will conrm
when pairing is complete.
* refer to phone’s user manual