Electronic Hook Switch (EHS) Solutions for Siemens
Supported Siemens IP phones
OpenStage 40/60/80 | Plus OptiPoint 600 |
Setup information
To connect your Siemens phone and Jabra headset with the DHSG cable, just follow these simple steps:
Setting up the Siemens IP phone
1.Plug the single end of the Y cable in the headset socket on the phone’s acoustic adaptor
2.Connect the large plug in the other end to the AUX port on the headset base
3.Plug the smaller RJ11 in the normal phone socket on the headset base
OptiPoint 500 Basic/Std/Adv/Eco. | OptiPoint 410/420 Std/Adv |
Jabra DHSG cable for Siemens
| OR |
Jabra GN9350/ | Jabra GN9120 EHS/ |
Jabra GN9350e | Jabra GN9125 EHS |
SeE the last page for order info
Setting up the Jabra GN9350/GN9350e headset
1.Open up the cover on the base unit.
2.On the LCD display, arrow over to the handset picture and select it.
3.Arrow down to the DHSG mode and select it by pressing the okay button.
4.Set Dial tone selector in position “A”.
Dial tone |
|
| < |
selector | 4 | /12 | |
| 3 | /12 |
|
OLI AUX
Jabra GN9350/
Jabra GN9350e
Setting up the Jabra GN9120/GN9125 EHS headset
1.Set the headset to the DHSG setting by keeping the headset in the charge stand and hold plus and minus in for 6 seconds until the red light on the headset flashes rapidly.
2.Scroll through the three different settings using plus and minus and set to the lips icon. Leave for 15 seconds until the unit has set itself and is ready to go!
RHL DHSG AEI
Volume button
Link icon
Mute icon
Charge icon
For more information visit www.jabra.com/siemens
Regional sales contacts: |
|
Americas: Bill Orlansky, borlansky@gn.com |
|
EMEA: Norbert Lohwieser, nlohwieser@GN.com | 8 |
APAC: Mike Powrie, mpowrie@gn.com |
