www.jacksonmsc.com
Removing the imperial brass fitting. |
| Attaching the jumper wires. |
|
|
|
|
|
|
Pulling the thermostat probe and fitting from the well.
Sliding imperial fitting onto new thermostat.
6.Slide the new imperial brass fitting from your kit onto the new thermostat.
Removing the wires from the thermostat.
5.Attach the jumper wires to the wires that you removed from the old thermostat.
Putting the new thermostat in the well.
7.Insert the new thermostat/brass fitting combination into the well and tighten down the brass fitting by hand.
Rinse RegulatingThermostat Replacement Instructions | 3 | |
Revision A (11/16/2005) | ||
|
