Tara™ Plus Whirlpool Bath
Model: BR05, DB83
Ordering Information
Product Code:
BR05 Tara™ Plus Whirlpool Bath
Right Hand
DB83 Tara™ Plus Whirlpool Bath
Left Hand
•Center Drain Location
•Accessories / Hardware:
BMH Jet Trim Kit (3 Req’d): #J869
•Trim Kit Finishes Available:
(827)– Chrome
(898)– Brushed Chrome
(815)– Satin Nickel
(829)– Bright Brass
(805)– Platinum
(826)– Brushed Nickel
(845)– Oil Rubbed Bronze
Installation Notes
Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Technical Specifications
Dimensions
60” L x 60” L x
(1524 mm) L x (1524 mm) L x (527 mm) H
Drain/Overflow
A: 16” (406 mm) B:
Cutout
See Illustration Below
Total Weight
984 lb (446 kg) / 39 lb/sq. ft. (192 kg/m2)
Operating Gallonage
Min. 61 U.S. Gal. (231 Liters)
Max. 87 U.S. Gal. (329 Liters)
| 60" | Product Weight | |
12" H x 18" L |
| 118 lb (54 kg) | |
Service Access | 60" | Skirt Mounting | |
| Optional | ||
| Ref. | Electrical Specifications | |
| 14" x 4"* | ||
Motor | Heater (S) | Requires a dedicated GFCI protected separate circuit. | |
Motor/Pump: 120 VAC, 15 AMP, 60 Hz. | |||
|
| ||
|
| RapidHeat™: 120 VAC, 15 AMP, 60 Hz. |
| |
|
|
| 35" |
35" | 46" |
| |
44" | Opt. Service Access |
| |
| - 2" x 4" Stud |
Product Shown: Tara™ Left Hand Motor Plus Whirlpool Bath LH Model: DB83
*Measurements inside unit represent cutout in floor to allow for drain/overflow. Minimum Service Access dimensions given.
Heater (Standard)
Requires a dedicated GFCI protected separate circuit. RapidHeat™: P/N S750000
58" | 58" | |
(1473 mm) | ||
(1473 mm) | ||
|
59"
Ref.Motor
| Heater |
| Drain Cutout |
| |
(648 mm) | (648 mm) |
|
L
H
SIDE VIEW | END VIEW |
TARA™ PLUS LH CUTOUT
2"
A
B 
DRAIN/OVERFLOW
#FS22 10/06 | © Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com |
