Bellavista™
corner salon™ spa Bath
DT20 | Bellavista™ Corner Salon™ Spa with RapidHeat™ | |
Right Hand | ||
|
•Center Drain Location
•Accessories / Hardware:
PowerPro™ Jet Rings Kit: #M952
3 x AccuPro™ Jet Rings Kit: #P556
Rotary Drain Kit, 26” Cable: #DA34
•Trim Kit Finishes Available:
(827)– Chrome
(898)– Brushed Chrome
(815)– Satin Nickel
(829)– Bright Brass
(805)– Platinum
(826)– Brushed Nickel
(849)– Oil Rubbed Bronze
| 60" |
|
|
| Blower |
| 60" | 12" H x 24" L |
|
| |
Service Access | ||
| ||
| 12" x 4"* | Motor |
|
| Heater |
7.5"
3" 
Opt. Service Access
Product Shown: Bellavista™ Corner Salon™ Spa,Model: DT20
Installation Notes
Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Technical Specifications
Dimensions
60” L x 60” W x 25” H
(1524 mm) L x (1524 mm) W x (635 mm) H
Drain/Overflow
A:
Cutout
Template Provided P/N P654000
Total Weight
1165 lb (528 kg) / 49.6 lb/ft2 (242) kg/m2)
Operating Gallonage
87 U.S. Gal. (329 Liters)
Min. 83 U.S. Gal. (314 Liters)
Max. 91 U.S. Gal. (344 Liters)
Product Weight
197 lb (89 kg)
Skirt Mounting
Not Available
Electrical Specifications
Requires a dedicated GFCI protected separate circuit.
Blower: 120VAC, 20AMP, 60 Hz.
Motor/Pump and RapidHeat™: 240VAC, 20AMP, 60 Hz.
Heater (Standard)
Requires a dedicated GFCI protected separate circuit.
RapidHeat™: P/N BN60000
*Measurements inside unit represent cutout in floor to allow for drain/overflow.
Minimum Service Access dimensions given.
| MAX. 1"** | 60" |
|
|
|
| |
25" | (Blower) |
|
|
2” |
|
| |
|
| A | |
| (51 mm) | (Motor) | |
| (Inlet Heater) |
|
|
| (Motor) |
| (Blower) |
| SIDE VIEW | END VIEW |
|
| (Inlet Heater) | B | |
|
| ||
|
|
| DRAIN/OVERFLOW |
© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com | #FS01000 10/07 |
