Jacuzzi EE10 Center Drain Location Accessories / Hardware PowerPro Jet Rings #M952, Bellavista

Bellavista™ 5

Whirlpool Bath

EE10 Bellavista™ 5 Whirlpool Bath, Right Hand

•Center Drain Location

•Accessories / Hardware:

PowerPro™ Jet Rings: #M952

AccuPro™ Neck Jet Rings Kit: #P556 (3 Required)

Oval Trim Kit: #N557

Rotary Drain Kit, 26” Cable: #8730

•Trim Kit Finishes Available:

(827)– Chrome

(898)– Brushed Chrome

(815)– Satin Nickel

(829)– Bright Brass

(805)– Platinum

(826)– Brushed Nickel

(849)– Oil Rubbed Bronze

Installation Notes

Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.

PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Technical Specifications

Dimensions

60” L x 42” W x 26” H

(1524 mm) L x (1067 mm) W x (660 mm) H

Drain/Overflow

A: 20” (508 mm) B: 11-3/4” (298 mm)

60"

12" H x 18" L Service Access

Cutout

Template Provided P/N P187000

Total Weight

1026 lb (465 kg) / 59 lb/sq. ft. (288 kg/m2)

Operating Gallonage

Motor30-1/8"

42" 4" x 4"*

Heater

11-3/4"

Opt. Service Access

7"		6"
	32-1/2"

Product Shown: Bellavista™ 5 WhirlpoolBath Right Hand Shown, Model: EE10

*Measurements inside unit represent cutout in floor to allow for drain/overflow.

Minimum Service Access dimensions given.

80 U.S. Gal. (303 Liters)

Product Weight

160 lb (50 kg)

Skirt Mounting

Not Available

Electrical Specifications — Model EE15 only Requires a dedicated GFCI protected separate circuit.

Motor/Pump: 120 VAC, 20 AMP, 60 Hz.

RapidHeat™: 120 VAC, 15 AMP, 60 Hz.

Heater (Standard) — Model EE15 only

Requires a dedicated GFCI protected separate circuit.

RapidHeat™: P/N S750000

L		MAX. 1/2"**
2"	(Heater)	H

W

A

(51 mm)

SIDE VIEW

(Motor)

	B
END VIEW	DRAIN/OVERFLOW

© 2007 Jacuzzi Whirlpool Bath • 14880 Monte Vista Avenue • Chino, CA 91710 • www.jacuzzi.com #FR18000 10/07