Venicia™ Whirlpool Bath
Model: EJ00
Ordering Information
Product Code:EJ00 Venicia™ Whirlpool Bath Right HandInstallation Notes
Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.
PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.
•Center Drain Location
•Accessories / Hardware:
Trim Kit: 4 HTA Jet Rings #M952 Rotary Drain Kit, 30” Cable #K606 Trim Kit: 2 BMH Jet Rings #J869 Oval Trim Kit #N557
2 X Trim Kit: 2 Neck Jet Rings #P556 Hand Rails (Must Buy) #G864
•Trim Kit Finishes Available:
(827)– Chrome
(898)– Brushed Chrome
(815)– Satin Nickel
(829)– Bright Brass
(805)– Platinum
(826)– Brushed Nickel
(849)– Oil Rubbed Bronze
72" Motor18" x 4"
42"
3" HeaterOpt. Service Access
| 36" | |
|
12" H x 18" L Service Access
29-7/8"
Technical Specifications
Dimensions72” L x 42” W x 23” H
(1829 mm) L x (1067 mm) W x (584 mm) H
Drain/OverflowA: 20 “ (508 mm) B: 14 “ (356 mm)
CutoutTemplate Provided Part Number #P187000
Total Weight1130 lb (513 kg) / 54 lb/sq. ft. (264 kg/m2)
Operating Gallonage90 U.S. Gal. (341 Liters)
Product Weight130 lb (59 kg)
Skirt MountingNot Available
Electrical SpecificationsRequires a dedicated GFCI protected separate circuit. Motor/Pump: 120 VAC, 20 AMP, 60 Hz.
RapidHeat™: 120 VAC, 15 AMP, 60 Hz.
Heater (Standard)Requires a dedicated GFCI protected separate circuit. RapidHeat™: P/N S750000
Product Shown: Venicia™ Whirlpool Bath Right Hand Shown Model: EJ00
*Measurements inside unit represent cutout in floor to allow for drain/overflow. Minimum Service Access dimensions given.
(51 mm) L MAX. 1/2"** W 2"
|
|
| A |
(Heater) |
| H |
|
|
|
| |
|
|
| B |
SIDE VIEW | (Motor) | END VIEW | DRAIN/OVERFLOW |
|
|
VENICIA™
#FS33 12/06 | © Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com |