Jacuzzi Capella Plus Whirlpool Bath, Model EM90, EN00, Ordering Information, Product Code

Capella™ Plus Whirlpool Bath

Model: EM90, EN00

Ordering Information

Product Code:

EM90 Capella™ Plus Whirlpool Bath

Right Hand

EN00 Capella™ Plus Whirlpool Bath

Left Hand

•Center Drain Location

•Accessories / Hardware:

Trip-Lever Drain Kit #X559

Rotary Drain Kit, 26” Cable #8730

HTC Jet Trim Kit: #D095

BMH Jet Trim Kit (3 Req’d): #J869

•Trim Kit Finishes Available:

(827)– Chrome

(898)– Brushed Chrome

(815)– Satin Nickel

(829)– Bright Brass

(805)– Platinum

(826)– Brushed Nickel

(845)– Oil Rubbed Bronze

Installation Notes

Refer to installation instructions included with fixture before beginning installation. Please confirm product availability and specifications before commencing with any installation work.

PRODUCT SPECIFICATIONS AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Technical Specifications

Dimensions

60” L x 60” L x 20-1/2” H

(1524 mm) L x (1524 mm) L x (521 mm) H

Drain/Overflow

A: 18” (457 mm) B: 12-1/8” (308 mm)

Cutout

See Illustrations Below

Total Weight

1177 lb (535 kg) / 47.8 lb/ft2 (233 kg/m2)

Operating Gallonage

MIN: 55 U.S. gal (208 liters)

MAX: 90 U.S. gal (341 liters)

Product Weight

130 lb (59 kg)

Opt.		33-1/2"
Service	60"	60"
Access
		Motor
Service		Heater
		14" X 4"
Access

Skirt Mounting

Optional

Electrical Specifications

Requires a dedicated GFCI protected separate circuit. Motor/Pump: 120 VAC, 15 AMP, 60 Hz.

RapidHeat™: 120 VAC, 15 AMP, 60 Hz.

Heater (Standard)

Requires a dedicated GFCI protected separate circuit. RapidHeat™: P/N S750000

	27"	27"
	34-15/16"	6"
	43-1/8"	46-5/8"	58"		58"		58"		58"
			(1473 mm)	Motor	(1473 mm)	59-1/8"	(1473 mm)	Motor	(1473 mm)
			59-1/8"	Heater				Heater
			1502 mm)		1502 mm)
							Drain Cutout
			Ref.			Ref.
				Drain Cutout
	CAPELLA™ 60 PLUS , Left Hand
Product Shown: Capella™ Left Hand Motor Plus Whirlpool Bath LH Model: EN00			25-5/8"		25-5/8"	25-5/8"
			(651 mm)			(651 mm)			25-5/8"
* Measurements inside unit represent cutout in floor to allow for drain/overflow.					(651 mm)				(651 mm)
				45-3/7"				45-3/7"
Minimum Service Access dimensions given.
				(1162 mm)				(1162 mm)
			CAPELLA™ 60 PLUS, Left Hand				CAPELLA™ 60 PLUS, Right Hand
				CUTOUT				CUTOUT
	(Motor)	2”
H		(50,8 mm)			A
	(Suction Heater)
	SIDE VIEW		END VIEW		B
	CAPELLA™ PLUS LEFT HAND MOTOR				DRAIN/OVERFLOW

#BW07 01/07 © Jacuzzi Whirlpool Bath • 14801 Quorum Drive • Dallas • Texas • 75254 • www.jacuzzi.com