General Whirlpool Bath Troubleshooting Guide

PROBLEM

PROBABLE CAUSES

REMEDY

 

 

 

Pump/Motor does not start.

No power to pump/motor.

Reset GFCI.

 

Pump/motor not plugged in.

Insert plug fully into outlet.

 

Magic Touch switch - air tube not

Reconnect tube to Magic Touch

 

connected to switch or to air switch

switch or to air switch pump/motor.

 

on pump/motor.

 

 

Pump/motor faulty.

Replace pump/motor assembly.

 

 

 

Pump/Motor operates but no fully

Jets are closed.

Open jets by rotate counterclockwise.

adjustable jets are functioning.

 

 

 

Suction cover may be clogged.

With motor turned off, remove safety

 

 

cover and remove any debris.

 

 

Replace suction cover before

 

 

operating.

 

Air entrapment.

Ensure that water level is at least 2"

 

 

above the highest jet.

 

 

 

Pump/Motor operates but air is not

Air valves closed.

Open air control valves.

injected into water.

 

 

 

 

 

Pump/motor does not shutoff.

Magic Touch switch - air tube not

 

connected to switch or to air switch

 

on pump/motor.

 

If a wall timer is used, the timer is

 

defective

Reconnect tube to Magic Touch switch or to air switch pump/motor.

Replace timer.

Water leakage from pump unions.

Overtightened, O-ring may be pinched or improperly seated, under tightened.

Untighten unions check and reseat O- ring. If O-ring has been pinched out of shape, replace (refer to Service Support number below). When tightening union nuts, hand tighten only.

Pump/motor shuts off by itself or with wall timer, before set time elapses.

Motor thermal protection has deacti- vated pump/motor due to overheat- ing. (Supply voltage low.)

GFCI tripped.

Let motor cool; thermal protection will reset. Check for proper ventilation. (Check supply voltage.)

Reset GFCI. If it continues to trip do not use this unit. Disconnect the unit and have the problem corrected by a licensed electrician before using.

Inadequate supply wiring.

Consult a licensed electrician to

 

correct wiring to unit.

 

 

Note: If unit is within the warranty period, contact Jacuzzi Whirlpool Bath Service Support at (866) 905-2289 with bath's serial number before work is started. The Serial Number is located on the Specification/Serial Number Plate. See page 13.

12

Jacuzzi Whirlpool Bath© U961000F 12/04

Page 16
Image 16
Jacuzzi U961000F operating instructions General Whirlpool Bath Troubleshooting Guide, Problem Probable Causes Remedy

U961000F specifications

The Jacuzzi U961000F is an innovative bathtub that embodies luxury and comfort, designed to cater to a wide range of users seeking a relaxing and rejuvenating bathing experience. This model stands out with its impressive features, cutting-edge technologies, and superior design elements that enhance any bathroom setting.

One of the main highlights of the Jacuzzi U961000F is its spacious soaking area, providing ample room for users to unwind and soak in comfort. The ergonomic design ensures that every bath is pleasurable, allowing for a natural and restful posture. The bathtub's sleek lines and modern silhouette contribute to a sophisticated aesthetic, making it a perfect centerpiece for contemporary bathrooms.

The U961000F is equipped with advanced hydrotherapy features, a hallmark of Jacuzzi products. The patented Jet technology delivers targeted jets that provide soothing water massage to promote relaxation and relieve muscle tension. Users can easily customize their hydrotherapy experience through adjustable jet settings, making it possible to tailor the intensity and placement of water flow according to individual preferences.

Moreover, this model incorporates the latest in water management technology, ensuring a more efficient use of water while still providing an indulgent soaking experience. The integrated drainage system allows for quick water removal, enhancing convenience and functionality. This practical design feature ensures that users can enjoy their baths without long wait times for water to drain, an aspect that truly elevates the overall bathing experience.

The Jacuzzi U961000F also emphasizes safety and accessibility, featuring a low-profile design that makes it easier for users of all ages and mobility levels to enter and exit the tub. The non-slip surface and strategically placed grab bars further enhance safety, allowing for a worry-free bathing experience.

In addition to its practical aspects, the U961000F is crafted from high-quality acrylic that not only improves durability but also retains heat better than conventional materials. This ensures that bathers can enjoy their baths at a comfortable temperature for longer periods.

Overall, the Jacuzzi U961000F is more than just a bathtub; it represents a sanctuary for relaxation and well-being. With its sophisticated features, inviting design, and commitment to quality, this model is an excellent investment for anyone looking to enhance their home with a luxurious bathing option. Whether for a calming end to a long day or a refreshing start to the morning, the U961000F is destined to offer a spa-like experience at home.