Introduction
Your
The left and right channels are completely separate to assure safe operation with any type of amplifier, including those with isolated grounds (bridging outputs).
Other features include power handling capability of up to 155 watts per channel.
Installation
When any speakers are turned on resistance is inserted in series with them in order to keep the amplifier load at 4 Ohms or higher. Coupling to any speaker is always direct when only one switch in “ON”
The JSS4 rubber feet provide a
The JSS4 front panel buttons all operate in the same manner, push to turn ON, push again to turn OFF. The switch is ON when pushed in closest to the JSS4 front panel.
Caution: Do not apply audio power in excess of 155 watts per channel when the internal impedance matching resistors are switched in! DAMAGE TO COMPONENTS CAUSED BY EXCES-
SIVE POWER APPLICATION IS NOT COVERED UNDER WARRANTY.