5
GETTING READY TO SEWConnecting the Power Supply
Turn off the power switch.
Insert the foot control plug into the machine socket.
Insert the machine plug into the machine socket.
Insert the power supply plug into the wall outlet.
Turn on the power switch.
1Power Switch
2Foot Control Plug
3Machine Socket
4Machine Plug
5Power Supply Plug
6Wall Outlet
NOTE:
If you turn off the power switch, wait for 5 seconds before
turning it on again.
For Your Safety:
While in operation, always keep your eyes on the sewing
area, and do not touch any moving parts such as the thread
take-up lever, handwheel or needle.
Always turn off the power switch and unplug from the power
supply:
- when leaving the machine unattended.
- when attaching or removing parts.
- when cleaning the machine.
Do not place anything on the foot control, otherwise the
machine will run intermittently.
1
4
3
2
36
5
Controlling Sewing Speed
Speed control lever
You can limit the maximum sewing speed by the speed control lever according to
your sewing needs.
To increase sewing speed, slide the lever to the right.
To decrease sewing speed, slide the lever to the left.
Foot control
Pressing on the foot control can vary sewing speed. The harder you press the foot
control, the faster the machine runs.
NOTES:
The machine runs at the maximum speed set by the speed control lever when the
foot control is being fully depressed.
Keep the foot control free from accumulation of lint, dust and loose cloth.
Do not place anything on the foot control.