Changing your Cover Plate:
1.Place the headset in your left hand between thumb and index finger.The microphone should be pointed inwards towards your palm.
2.Using your right hand, place your thumb on the pointed end of the face cover and press down while pulling backwards until the face cover snaps out of place. Remove cover. This takes a little bit of pressure.
3.Install the new face cover by inserting the pointed end in a slight angle first and then snap into place by pushing inward towards your left hand at the wide end of the face cover.
4.After the front has snapped into place, press downwards on the wide end to snap it into place.
Changeable Face Plate
Function Button
