Programming With Code Search
If your TV, VCR, DBS Satellite System or Cable Box does not respondafteryouhavetriedallthecodesforyourbrand,orifyour brand is not listed, try searching your code by following the steps below:
1. Manually turn on the device you wish to program.
2.Press and hold the CODE SEARCH until the INDICATOR LIGHT lights, then release CODE SEARCH.
3.Press and release the
device button for the device you are programming. The INDICATOR LIGHT will blink once, then remain lit.
4.Press and release OFF•ON until your device turns off.
5.When your device turns off, press ENTER, the INDICATOR LIGHT will turn off.
IMPORTANT: you may have to press OFF•ON up to 200 times.
Identifying Codes
From Your Universal
Remote
INDICATOR
LIGHT
BLINK
OFF
Retrieving Codes
If you need to find the
1.Press and hold CODE SEARCH until the INDICATOR LIGHT
lights, then release CODE SEARCH.
2.Press and release the device but- ton for the code you are retrieving. The INDICATOR LIGHT will blink once.
INDICATOR LIGHT
3. Press and release
CODE SEARCH. The INDICATOR LIGHT will turn off.
4.Starting with 0 on the keypad, press the number buttons in order
5.The number which causes the INDICATOR LIGHT to blink is the first digit of your code.
6.Repeat Step 4 until you have retrieved all three numbers in the code.
...
OFF
10
