Table of Contents |
|
Setup | 3 |
Battery Installation | 3 |
Battery Saver | 3 |
Code Saver | 3 |
Code Setup | 3 |
Button Functions | 4 |
DVD Functions | 6 |
SAT Functions | 6 |
Code Entry | 7 |
Direct Code Entry | 7 |
Code Search | 8 |
Using Your Remote | 9 |
Code Identification | 9 |
Controlling Devices with Power On and Off .... | 10 |
Controlling Combo Devices | 10 |
VCR/DVD/DVR | 10 |
Volume/Mute Control and | 11 |
All Volume/Mute Control to any one Mode | 11 |
Setting any Mode for its own Volume/Mute .... | 12 |
Sleep | 13 |
Troubleshooting | 14 |
Congratulations on your purchase of the RM24965 Universal Remote Control. The RM24965 is one of the most easy to use remote controls available today. With the RM24965, juggling multiple remote controls is a thing of the past! Your RM24965 controls up to seven devices, including the most popular brands of TV, VCR, DVD, SAT, CBL, and audio equipment.
Note: Some functions from your original remote may not be controlled by this remote. Use the original remote, if available, to control such functions. Sometimes buttons other than described in these instructions may actually perform the function. For example, the CHAN and VOL buttons might be used to navigate through menu choices. We recommend you experiment with the remote to identify if such situations pertain to your equipment.
The RM24965 is easy to use, easy to program, and it gives you total
2
Setup
Battery Installation
1.On the back of the remote, push down on the tab and lift the cover off.
2.Match the batteries to the + and - marks inside the battery case, then insert 2 AAA Alkaline batteries.
3.Press the battery cover back into place.
Battery Saver
Your remote automatically turns off if the buttons are depressed more than 30 seconds. This will save your batteries should your remote get stuck in a place where the buttons remain depressed (e.g., between the sofa cushions).
Code Saver
You will have up to 10 minutes to change the batteries in your remote without losing codes you have programmed. However, do not press any buttons until batteries are installed in the remote. If buttons are pressed without batteries in the remote, all codes will be lost.
Code Setup
The CODE SEARCH button is used to setup the remote. You can either setup the remote using the code for your brand of product, from the code tables (on separate sheet), or you can search through the library of codes until you find a code that works for your product. Please refer to “Programming with Code Search” page 9 for more information on using the code search feature to learn how to search through the library of codes for your products. NOTE: You can store any kind of code under any mode (except TV). I.E. you can store a VCR code under the CABLE button, or a DVD code under the VCR button, etc. However, you can only store TV codes under the TV button.
3
