Programming for Cable /DVD

Use the CBL/DVD button to assign your cable box or DVD player. This button could also be assigned to a CDplayer, another TV, VCR or DVD player.

1.

Manually turn on

 

 

 

 

 

 

 

 

 

 

the Cable Box, DVD

 

 

 

 

 

 

 

 

 

 

Player, or other device.

 

 

 

 

 

 

 

 

 

2. Press and hold the

 

 

 

 

 

 

 

 

 

 

SETUP button until

 

 

 

 

 

 

 

 

 

 

the INDICATOR

 

 

 

 

BLINK

 

 

 

LIGHT lights, then

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

release the SETUP

 

 

 

 

 

 

 

 

 

 

button.

 

 

 

 

 

 

 

 

 

3.

Press and release

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

the CAB/DVD button

 

 

 

 

 

 

 

 

 

 

(the INDICATOR LIGHT

 

 

 

 

 

 

 

 

 

 

will blink then

 

 

 

 

 

 

 

 

 

 

remain lit).

 

 

 

 

 

 

 

 

 

4. Find the three digit

 

 

 

 

 

 

 

 

 

 

code for your

 

 

 

 

 

 

 

 

 

 

device in the

 

 

 

 

 

 

 

 

 

 

code list in the

 

 

 

 

 

 

 

 

 

 

back of this book

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and enter it using

 

 

 

 

 

 

 

 

 

 

the Number Buttons.

 

 

 

OFF

 

 

 

After your code is entered, the INDICATOR LIGHT will turn off.

5.Aim the remote at your device and press the POWER button. Your device should turn off.

Note: If your device does not respond, try all

the codes for your brand. If the codes do not work, or your brand is not listed, try the Code Search method on page 8.

6.With your device on, press CHANNEL UP. If the device responds, no further programming is required.

7.Enter your code here for easy reference.

CAB/DVD/DEVICE CODE

6

Page 7
Image 7
Jasco RM94904 instruction manual Programming for Cable /DVD, Blink