JBL AC2212/00 specifications AC2215/64 Compact 2-Way Loudspeaker with 1 x 15 LF

AC2215/64 Compact 2-Way Loudspeaker with 1 x 15" LF

Key Features:

60° x 40° Coverage.

PT™ Progressive Transition™ Waveguide for good pattern control with low distortion.

Bi-Amp/Passive Switchable.

Optional U-Bracket for easy installation (see AE Series Bracket Guide).

Applications:

Small performing arts facilities

Houses of worship

Theatrical sound design

Auditoriums

Sports facilities

Specifications:

System:

Frequency Range1 (-10 dB): 42 Hz – 19 kHz

Themed entertainment venues

Delay/fill locations of larger systems

AC2215/64 is a compact 2-way full- range loudspeaker system comprised of one 380 mm (15 in) low frequency driver and one 38 mm (1.5 in) exit/25 mm (1 in) voice-coil compres- sion driver. The PT Progressive Transition waveguide provides 60° by 40° coverage. High-slope passive crossovers minimize band overlap and well-controlled off-axis response enhances arrayability.

The cabinet is fitted with M10 threaded suspension points. Optional U-bracket is available for easy installation.

AC2215/64 is part of JBL’s AE Application Engineered Series, a versatile family of loudspeakers for a wide variety of fixed installation applications.

Frequency Response1 (±3 dB): 50 Hz – 17 kHz

Coverage Pattern: 60° x 40°

Directivity Factor (Q): 17.8

Directivity Index (DI): 12.5 dB

Crossover Modes: Bi-amp/Passive switchable

Passive Crossover Slopes2: 4th order (24 dB/oct) Linkwitz-Riley HP & LP, 2.2 kHz

Transducer Power Rating (AES)3: LF: 275 W (1100 W peak), 2 hrs 250 W (1000 W peak), 100 hrs

HF: 30 W (120 W peak), 2 hrs

Long-Term System Power Rating (IEC)4: Passive mode: 250 W (1000 W peak), 100 hrs

Maximum SPL5: Bi-amp mode:

LF: 121 dB-SPL cont avg (127 dB peak)

HF: 129 dB-SPL cont avg (135 dB peak) Passive mode:

121 dB-SPL cont avg (127 dB peak)

System Sensitivity6 (1W @ 1m): Passive mode: 97 dB SPL

Transducers:

Low Frequency Driver: 1 x JBL M115-8A 380 mm (15 in) driver with 63 mm (2.5 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity6 (1W @ 1m, within operational band): 97 dB SPL

High Frequency Driver: JBL 2412H/MTA, 38 mm (1.5 in) exit compression driver, 25 mm (1 in) voice coil

Nominal Impedance: 8 ohms

Sensitivity (1W @ 1m): 114 dB SPL

Waveguide: PT-F64HF

Physical:

Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment: 15 points (4 top, 4 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish: Black DuraFlex™ finish. White available upon request.

Grille: Powder coated 14 gauge perforated steel, with acoustically trans- parent black foam backing.

Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in paral- lel with barrier strip for loop-through.

Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D): 637 x 422 x 504 mm (25.1 x 16.6 x 19.9 in)

Net Weight: 24.0 kg (53 lb)

Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers

U-Bracket MTU-2

1Bi-amp mode, with recommended active tuning.

2Resultant engineered acoustical response of crossover network and components.

3AES standard, one decade pink noise with 6 dB crest factor within device's operational band, free air. Standard AES 2 hr rating plus long-term 100 hr rating are specified for low-frequency transducers.

4IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.

5Calculated based on power rating and sensitivity, exclusive of power compression.

6Anechoic sensitivity in free field, no additional sensitivity gain from boundary loading.

JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.