Troubleshooting
If there is no sound from
any of the speakers, check
the following:
•Receiver/amplifier is on and a source is playing.
•Review proper operation of your receiver/amplifier.
If there is no sound coming
from one speaker, check the
following:
•Check the “Balance” control on your receiver/amplifier.
•Check all wires and connec- tions between receiver/ amplifier and speakers.
•Make sure all wires are connected. Make sure none of the speaker wires is frayed, cut, or punctured.
If the system plays at low volumes but shuts off as volume is increased, check the following:
•Check all wires and connec- tions between receiver/ amplifier and speakers.
•Make sure all wires are con - nected. Make sure none of the speaker wires is frayed, cut, or punctured.
•If more than one pair of main speakers is being used, check the minimum imped- ance requirements of your receiver/amplifier.
If there is low bass output,
check the following:
•Make sure the polarity (+ and
If there is no sound from
the center speaker, check
the following:
•Make sure that your receiv- er’s Center Channel Mode is in the ”normal“ or ”wide“ posi- tion. If it is in the ”phantom“ position, the center speaker will not play.
•Check all connections between processor/amplifier and the center speaker.
