JBL CONTROL-25AV-WH specifications Monitor Speaker, Key Features, Specifications

Control® 25AV Shielded Indoor/Outdoor

Monitor Speaker

Professional Series

Key Features:

Video shielded for use near video monitors.

Extremely smooth frequency response.

Stainless steel grille for harsh environments.

60 Watt transformer for 70V or 100V lines, with 8 thru.

SonicGuardTM overload protection.

130 mm (5¼") polypropylene coated woofer, 10 mm (¾") titanium coated horn-loaded tweeter.

Includes InvisiBall ® mounting hardware and sealed input panel cover.

Screw-down input terminals.

100° x 100° high frequency horn.

The Control® 25AV utilizes a deep cabinet, high power components and complex network to achieve extremely smooth high fidelity performance from a compact 2-way loudspeaker.

Premium performance capability and even coverage ensures excellent sound quality throughout the listening area.

Magnetic shielding allows use of the speaker in close proximity to video moni- tors.

The top-quality transformer, with reduced saturation, allows use on either 70 volt or 100 volt distributed speaker lines, with similar performance fidelity. In the bypass position, the high 8 imped- ance allows use of more speakers on a loudspeaker line.

The unique, global patent pending InvisiBall ® mounting method is simple to install, aims easily, and provides a high degree of theft deterrence.

The cabinet accepts a variety of paints to match any décor.

Weather resistance is maximized by a stainless steel grille, which is paintable. Coating the woofer in polypropylene and terminating its circumference in JBL’s WeatherEdgeTM, a seamless, butyl rubber extension of the woofer surround, pro- tects critical transducer elements. The polycarbonate tweeter diaphragm is rein- forced with a thin film of titanium for added rigidity and endurance. Nickel/zinc rust-resistant terminals ensure a secure input connection.

JBL’s exclusive SonicGuard overload protection is virtually inaudible to the lis- tener, ensuring reliability while providing full fidelity sound.

The Control 25AV can be used full range or low frequencies can be further augmented with the addition of one of the Control Contractor subwoofer models.

Available in black or white (-WH)

Specifications:

Freq. Range (-10 dB)1: 70 Hz - 23 kHz

Midrange (±1.5 dB, typical)2: 130 Hz - 14 kHz

100 Hr Power Capacity3: 200 Watts Continuous Program Power

100 Watts Continuous Pink Noise

Nominal Coverage: 100° x 100°

Nominal Sensitivity4: 87 dB SPL, 1W @ 1 m (3.3ft)

Nominal Coverage: 100° x 100°

Maximum SPL @ 1m: 113 dB continuous peak pink noise 107 dB continuous average pink noise

103 dB continuous average music or speech

Directivity Factor (Q): 4.9, averaged 500 Hz to 4 kHz

Directivity Index (DI): 6.9 dB, averaged 500 Hz to 4 kHz

Nominal Impedance: 8 ohms

Minimum Impedance: 6.7 ohms at 230 Hz

Crossover Type: Second Order Lowpass, Second Order Highpass, Complex

Optimization for Maximally Flat Response

Transformer Taps: 170V: 60W, 30W, 15W, 7.5W taps (Taps #4,#3, #2 & #1) 100V: 60W, 30W, 15W taps (Taps #3, #2, & #1)

Thru position: 8 nominal

Transducers:

Low-Frequency: 130 mm (5.25 in) polypropylene-coated paper with WeatherEdge surround, 25 mm (1 in) voicecoil on kapton former

High-Frequency: 20 mm (.75 in) titanium coated PEI

Physical:

Enclosure Material: High Impact polystyrene

Grille: Painted stainless steel, black or white to match cabinet, paintable

Overload Protection: Full-range power limiting to protect network and transducers. Internal fuse to protect during exceptional overload condition

Environmental: Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. IEC 529 IP-X4 splashproof rating

Termination: Screw-down terminal strip, zinc-plated copper base, nickel plated metal screws/washers, accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10), plus bare wire. (up to 12 AWG)

Safety Agency Rating: Transformer is listed per UL1876

Colors: Black or white (-WH)

Rotation: Against wall on InvisiBall Base: 37° vertical 44° horizontal

On bracket: 44° all directions

Dimensions (H x W x D): 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)

Net Weight (ea): 4.0 kg (9 lbs)

Shipping Weight (pair): 9.0 kg (20 lbs) per pair

Included Accessories: 1 Pr MTC-PC input panel cover, InvisiBall mounting base, 6 mm x 100 mm InvisiBall hex wrench

Optional Accessories: MTC-25V for vertical columnar mounting of up to 3 speakers MTC-25/23H for horizontal splaying of 2 speakers. Three brackets array either 3 or 6 speakers in a hanging array module for 360° horizontal coverage.

MTC-28/25CM to install speaker down from the ceiling. Check JBL Control Contractor Bracket and Adapter Handbook. MTC-xxWMG WeatherMax™ Stainless Steel Grille with a three-layer backing, including vapor barrier to break up driving precipitation. Available in black or white (-WH).

1In half-space (on wall). 2In full-space

3Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous program power is a conservative expression of the system’s ability to handle normal speech and music program material and is defined as 3 dB above the Continuous Pink Noise Rating.

4Half-space (on wall) averaged 100 Hz to 10 kHz.

JBL continually engages in research related to product improvement. Changes introduced into existing products with- out notice are an expression of that philosophy.